New Simco Modulated Pulse AeroBar 5635 MP, 1750mm, 75mm Pitch, 23 OP-Nzl, Si Pt
Product Number: 915635175075QOU3001
1750 mm length (68.9")
75mm nozzle spacing
QOU30 OpenJet nozzle
Single Crystal Silicon Emitter
Voltage Input: 24 VDC ±10% power input RJ-45; 0.7A (max)
Output: 13.5 kV p-p (max), adjustable
Discharge ±1000-100V in 15 sec (typ) with no air-assist, Vp-p Swing of 80 at 24” below an emitter
center group of points
Balance <±35V measured in a controlled environment at 18” distance
Range 150-1000 mm distance to surface; application & customer specification dependent
Ion Emission Modulated Pulse (MP) Technology
Emitter
Points: ISO 14644-1 Class 1 Single-crystal Silicon
Pitch: 50 mm spacing for bars shorter than or equal to 600 mm, 75 mm spacing between
nozzles on all other lengths
Frequency: Low 0.3-1.5 Hz; high 1-33 Hz
Cleanroom Class
ISO 14644-1 (0.1 μm particles) and Extended ISO Class 1* cleanliness (10 nm particles or
nanoparticles) using 45-50% output voltage setting and OpenJet nozzles with Single-
crystal Silicon emitters
Air Supply
Input: Clean Dry Air (CDA) or Nitrogen
Pressure: 45 psi max
Flow: 1-3.5 lpm/nozzle
Connection: 8 mm OD one-touch fitting
Bar Setting
DIP switches for general power settings; trimpots for fine tuning balance, frequency,
& power output; or use the serial output to the 5635 Bar MP Control software for fine
adjustments
Ozone <0.05 ppm (24-hour accumulation)
EMI Below background level
Operating Env 15-35°C (59-95°F); 30-60% RH, non-condensing
Enclosure ABS chassis; stainless steel ground plate
Output: 13.5 kV p-p (max), adjustable
Discharge ±1000-100V in 15 sec (typ) with no air-assist, Vp-p Swing of 80 at 24” below an emitter
center group of points
Balance <±35V measured in a controlled environment at 18” distance
Range 150-1000 mm distance to surface; application & customer specification dependent
Ion Emission Modulated Pulse (MP) Technology
Emitter
Points: ISO 14644-1 Class 1 Single-crystal Silicon
Pitch: 50 mm spacing for bars shorter than or equal to 600 mm, 75 mm spacing between
nozzles on all other lengths
Frequency: Low 0.3-1.5 Hz; high 1-33 Hz
Cleanroom Class
ISO 14644-1 (0.1 μm particles) and Extended ISO Class 1* cleanliness (10 nm particles or
nanoparticles) using 45-50% output voltage setting and OpenJet nozzles with Single-
crystal Silicon emitters
Air Supply
Input: Clean Dry Air (CDA) or Nitrogen
Pressure: 45 psi max
Flow: 1-3.5 lpm/nozzle
Connection: 8 mm OD one-touch fitting
Bar Setting
DIP switches for general power settings; trimpots for fine tuning balance, frequency,
& power output; or use the serial output to the 5635 Bar MP Control software for fine
adjustments
Ozone <0.05 ppm (24-hour accumulation)
EMI Below background level
Operating Env 15-35°C (59-95°F); 30-60% RH, non-condensing
Enclosure ABS chassis; stainless steel ground plate