Unused product + Full product code + 30 Day money back guarantee + Free shipping= Low risk for you
New SKF SNL 517 VU Pillow Block Housing, 3.84" Seat, 2 Bolt Base, Cast Iron
Split plummer (pillow) block housing
Dimensions
| Diameter of bearing seat | 5.9055 in |
| Width of bearing seat | 2.4016 in |
| Centre height (pillow block) | 3.7402 in |
| Centre distance between bolt holes | 10.2362 in |
| Attachment bolt diameter | 0.7874 in |
Properties
| Housing type | Plummer/pillow block |
| Housing configuration | Two-piece |
| Mounting arrangement | Through shaft/Shaft end |
| Number of bolt holes for fasteners | 2 |
| Material, housing | Cast iron |
| Bearing housing seal type | Without |
| Housing lubrication feature/possibility | Grease |
Dimensions
| Da |
5.9055 in
|
Diameter of bearing seat |
|---|---|---|
G7 |
Tolerance class of bearing seat diameter | |
| Ca |
2.4016 in
|
Width of bearing seat |
| H1 |
3.7402 in
|
Centre height of bearing seat |
| Db |
3.8386 in
|
Bore diameter |
|---|---|---|
| A |
4.9213 in
|
Overall width |
| A1 |
3.5433 in
|
Foot width |
| G1 | 1/8-27 NPSF |
Thread of relubrication holes |
| H |
7.1654 in
|
Overall height |
| H2 |
1.2598 in
|
Foot height |
| L |
12.5984 in
|
Overall length |
| J |
10.2362 in
|
Distance between attachment bolts |
| N |
1.1024 in
|
Length of attachment bolt hole |
| N1 |
0.8661 in
|
Width of attachment bolt hole |
| A3 |
3.8583 in
|
Inside width between seal grooves |
|---|---|---|
| A4 |
0.1969 in
|
Width of seal groove |
| A5 |
0.3543 in
|
Distance to seal groove back face |
| A6 |
0.5118 in
|
Width at bore diameter |
| Dc |
4.1732 in
|
Diameter of seal groove |
| JV |
2.0472 in
|
Position of grease escape hole |
|---|---|---|
| HV |
1.2205 in
|
Position of grease escape hole |
| GV | 3/8-18 NPSF |
Thread of grease escape hole |
| J6 |
11.4961 in
|
Distance between dowel pins |
|---|---|---|
| J7 |
1.2992 in
|
Axial offset of dowel pins |
| N4 |
max. 0.315 in
|
Diameter of dowel pins |
Calculation data
| P0° |
83 179 lbf
|
Breaking load at 0° load angle (if the housing is not supported over its entire base) |
|---|---|---|
| P55° |
107 908 lbf
|
Breaking load at 55° load angle |
| P90° |
65 195 lbf
|
Breaking load at 90° load angle |
| P120° |
46 086 lbf
|
Breaking load at 120° load angle |
| P150° |
42 714 lbf
|
Breaking load at 150° load angle |
| P180° |
53 954 lbf
|
Breaking load at 180° load angle |
| Pa |
34 845 lbf
|
Breaking load, axial |
| Q120° |
49 458 lbf
|
Load to reach yield point at 120° load angle |
|---|---|---|
| Q150° |
28 101 lbf
|
Load to reach yield point at 150° load angle |
| Q180° |
24 729 lbf
|
Load to reach yield point at 180° load angle |
Materials
| Housing material | Cast iron |
| Corrosion protection | Paint - in accordance with ISO 12944-2, corrosivity category C2 |
Mounting information
| Recommended diameter of attachment bolts | G |
20 mm
|
|---|---|---|
| Recommended tightening torque for attachment bolts |
284 lbf·ft
|
|
| Size of cap bolts | M12x80 |
|
| Tightening torque for cap bolts |
59 lbf·ft
|
|
| Initial grease fill, 20% |
7.05 oz
|
|
| Initial grease fill, 40% |
11.6 oz
|
Included products
| Grease fitting | AH 1/8-27 PTF |