1Pc New Rexroth 25 2840 R060102510 Linear Ball Bushing 25X40X58MM
Some are 2840's some are 2210's. Unsure of the difference. If you need a specific one we can do our best to oblige. Please message first
New in original packaging.
Fast US Shipping
30-day warranty.
Shaft diameter d 25 mm
Format of linear bushings - Closed
Series Standard (metal)
Maximum dynamic load capacity Cmax 2480 N
Max. acceleration amax 100 m/s²
Maximum permissible linear speed vmax 2.5 m/s
Outer diameter D 40 mm
Permissible ambient temperature -10 °C…+80 °C
Footnote permissible ambient temperature (min…max) Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity.
Friction coefficient μ 0,001…0,004
Footnote friction coefficient μ Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load.
Breakaway force 14 N
Footnote shaft radial clearance h6 Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7.
Footnote breakaway force One wiper seal: Multiply value with factor 0.5
Footnote friction force FR One wiper seal: Multiply value with factor 0.5
Footnote maximum dynamic load capacity Cmax The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
Footnote minimum dynamic load capacity Cmin The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
Format of linear bushings - Closed
Series Standard (metal)
Maximum dynamic load capacity Cmax 2480 N
Max. acceleration amax 100 m/s²
Maximum permissible linear speed vmax 2.5 m/s
Outer diameter D 40 mm
Permissible ambient temperature -10 °C…+80 °C
Footnote permissible ambient temperature (min…max) Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity.
Friction coefficient μ 0,001…0,004
Footnote friction coefficient μ Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load.
Breakaway force 14 N
Footnote shaft radial clearance h6 Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7.
Footnote breakaway force One wiper seal: Multiply value with factor 0.5
Footnote friction force FR One wiper seal: Multiply value with factor 0.5
Footnote maximum dynamic load capacity Cmax The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
Footnote minimum dynamic load capacity Cmin The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.